BACK    MAIN

 

Direct IP Calling FAQs

» For HandyTone Series
» For BudgeTone 100 Series
» For GXP2000/GXV3000/BT200 Models


For HandyTone Series

  1. Pick up the receiver and press to access the Voice Prompt.
  2. On hearing the Prompt press 47 for Direct IP-IP call.
  3. Now, simply press the IP Address in 12 digit format ex. 192168001029
  4. Press # or the Send button.

Note: You will need to have SIP Server field blank, along with NAT traversal set to NO, no STUN Server configured and Use Random Ports set to NO. You can make calls between public IPs and Private IPs under the same LAN.

 

For BudgeTone 100 Series

BT101 and BT102 models

  1. Off-hook the receiver or press speakerphone.
  2. Press the MENU button
  3. Now dial the IP Address in 12 digit format ex.192168001029
  4. Press SEND.

Note: You will need to have SIP Server field blank, along with NAT traversal set to NO, no STUN Server configured and Use Random Ports set to NO. You can make calls between public IPs and Private IPs under the same LAN.

 

For GXP2000/GXV3000/BT200 Models

From firmware version 1.1.0.13 onwards, these models have the ability to dial an IP address of another endpoint under the same LAN segment by simply pressing the last octet in the IP address.

In the Advanced Settings page there is an option "Use Quick IP-call mode", by default it is set to No. When this option is set to YES, and #XXX is dialed, where X is 0-9 and XXX <=255, phone will make direct IP call to aaa.bbb.ccc.XXX where aaa.bbb.ccc comes from the local IP address REGARDLESS of subnet mask.

#XX or #X are also valid so leading 0 is not required (but OK).

eg.
192.168.0.2 calling 192.168.0.3 just dial #3 follow by SEND or #
192.168.0.2 calling 192.168.0.23 just dial #23 follow by SEND or #
192.168.0.2 calling 192.168.0.123 just dial #123 follow by SEND or #

192.168.0.2 dial #3 and #03 and #003 has same effect --> call 192.168.0.3

Note: If you have a SIP Server configured, Direct IP-IP call will still work. However, if you are using STUN, Direct IP-IP call will also use STUN.

Public IP-IP Calling for GXP2000/GXV3000

  1. Press the round MENU button to enter the GUI.
  2. Scroll down to Direct IP Call and press the round button to select this option.
  3. Move the cursor to the blank space above the OK and CANCEL using the round button.
  4. Enter the IP Address ex. 192*168*1*29
  5. Press the round button once you finish entering, to move the cursor to OK.
  6. Press the round button final time to initiate the IP-IP call.

Public IP-IP Calling for BT200

  1. Off-hook the receiver or press speakerphone.
  2. Press the MENU button
  3. Now dial the IP Address in 12 digit format ex.192168001029
  4. Press SEND.